Page 122 - Fleetman Catalog 2018

All Terrain Pallet Trucks

This lightweight, yet strong tubular frame design handles evenly distributed loads. Large
wheels allow for movement over most surfaces. Use at construction sites, gravel pits, and
nurseries. Features large 15" front pneumatic tires (22" on ALL-T-HD) and 10" pneumatic
steering wheels. Individual forks are 4"W x 2"H (4¾"W on ALL-T-HD). Easy to operate
with three position handle (UP, DOWN, and NEUTRAL). ERGONOMIC SOLUTIONS
model ALL-T-2
Optional Tow Bar package allows unit to be towed by an ATV or small utility tractor.
Designed for pulling in either loaded or unloaded position.

model ALL-T-HD
MODEL UNIFORM ADJUSTABLE FORK SERVICE OVERALL SIZE WEIGHT
NUMBER CAPACITY FORK WIDTH LENGTH RANGE (W x L x H) (POUND)
ALL-T-2� 2,000* 9½" to 26" 32" 3" to 9" 63¾" x 49" x 51" 328
ALL-T-2-48� 2,000** 9½" to 26" 48" 3" to 9" 65" x 63" x 51" 368
ALL-T-HD� 2,500*** 12" to 26¾" 32" 3" to 9" 64" x 50" x 51" 546
15
ALL-TTB� OPTIONAL TOW BAR PACKAGE (45¼"L x 4½"W x 4 /16"D) 23
*2,000 lb. at 12" horizontal load center, 1,500 lb. at 15" and 750 lb. at 24" horizontal load center
**2,000 lb. at 24" horizontal load center, 1,500 lb. at 27" and 1,000 lb. at 30" horizontal load center
***2,500 lb. at 12" horizontal load center, 2,000 lb. at 15" and 1,500 lb. at 24" horizontal load center
OPTIONAL
TOW BAR PACKAGE
Powered All Terrain Pallet Trucks

All terrain pallet truck with gas-powered traction drive system. Great for moving heavy
loads over rough terrain. Powered by a Briggs & Stratton 190cc gas-powered engine for
both the power traction drive and fork lift/lower. Handle with forward reverse speed
control and dead man safety switch. Approximate walking speed is 3 mph. Hydrostatic
transmission with hand-operated forward and reverse selection. Powered fork raise and
lower control lever. Usable width between outriggers is 52". Forks adjust 8" to 36".
Pneumatic steer wheels are 13" diameter x 4" wide each. The drive wheels are 18" diameter
x 8½" wide each foam filled. Wheels include sealed bearings for outdoor use. Steering arc
is 150°. Comply with ASME B56.1-2004. Optional 344cc engine with electric start and
heavy duty trans axle available.
model ALL-T-2-GPT
MODEL LOAD CENTER FORK SERVICE OVERALL WEIGHT
NUMBER UNIFORM CAPACITY (W x L) RANGE SIZE (W x L) (POUND)
GAS POWERED
ALL-T-2-GPT 2,000 lb.* 4" x 36" 3" to 12" 79" x 78" 1316
ALL-T-2-GPT-L 2,000 lb.** 4" x 48" 3" to 12" 79" x 90" 1346
ALL-T-4-GPT 4,000 lb.* 4" x 36" 3" to 12" 79" x 78" 1385
ALL-T-4-GPT-L 4,000 lb.** 4" x 48" 3" to 12" 79" x 90" 1418
ALL-T-GPT-10HP 344cc ENGINE FACTORY UPGRADE (approx 10 HP) 215
ALL-T-GPT-PT OPTIONAL POWER TILT ALLOWS FOR TILTING 265
OF FORKS ±8° & ADDS 6" TO OVERALL LENGTH model ALL-T-2-PRO
PROPANE POWERED
ALL-T-2-PRO 2,000 lb.* 4" x 36" 3" to 12" 79" x 78" 1327
ALL-T-2-PRO-L 2,000 lb.** 4" x 48" 3" to 12" 79" x 90" 1357
ALL-T-4-PRO 4,000 lb.* 4" x 36" 3" to 12" 79" x 78" 1396
ALL-T-4-PRO-L 4,000 lb.** 4" x 48" 3" to 12" 79" x 90" 1429
GAS POWERED STACKERS
ALL-T-1-GPT-ST-L 1,000 lb. 4" x 48" 3" to 50" 79" x 90" 1346
*CAPACITY AT 18" LOAD CENTER / **CAPACITY AT 24" LOAD CENTER model ALL-T-1-GPT-SL-L